Home

Office of the Secretary

Facilities Operations and Maintenance

Facilities Planning, Design and Construction

Procurement and Logistics

Real Estate

Administration

DGS Police

DGS Logo

Fuel Management Home Page

Refueling Instructions

 

 

Go Back to Previous Page

How to Order Printed Copies of this Handbook Site List Equipment Failure, Emergencies, Etc. Oil Dispensing Instructions Refueling Instructions About the System Message from DGSNavigational Buttons

Fleet Manager's
Handbook

 

 

1. Both the Yellow Driver Card and the White Vehicle Card must be inserted/swiped through the magnetic card reader. It doesn't matter which card is inserted first. Insert each card (one at a time) into the magnetic card reader slot located on the right side of the reader and swipe to the left.

2. The system will then display:

ENTER ODOMETER.

  • Using the keypad, enter the current odometer reading.

  • Depress the ENTER key.

3. The system will display:

SELECT PUMP NUMBER

  • Using the keypad, enter the pump number of the product desired.

  • Depress the ENTER key.

4. The system will then display the following sequence for you to verify:

a. PUMP #XX SELECTED

b. (Product selected) UNLEADED, OIL, DIESEL, OR CNG

c. PUMP #XX IS READY

d. PLEASE PUMP FUEL

5. Turn pump on, insert nozzle in tank and dispense the product.

6. When finished, turn pump off, hang up nozzle.

REFUELING IS COMPLETE